2020. 1. 25. 07:23ㆍ카테고리 없음
SSD will be startup/data, HD will be all data storage. About to install these in a new Macbook Pro Quad i7. OWC tech support recommends putting the SSD in the HD spot, and the HD in the Optical Drive Spot.
System Requirements. Operating System. USB 3.1 Gen 1. OS X 10.6 or later. Windows XP or later. Driver. Driver not required for OS X.
Driver not required for Windows. Hardware. Minimum. Mac or PC featuring USB 2.0 interface. Recommended for best performance. Mac or PC featuring USB 3.1 Gen 1 interface.
Bootability. USB — Any Mac that supports booting via USB Interface (Chipset). (1) USB 3.1 Gen 1 (ASMedia ASM1153E) Drives Supported.
(2) 3.5' SATA 6Gb/s drives. or (2) 2.5' SATA 6Gb/s drives. Performance.
Owc Data Doubler Optical To Sata Hdmi
Benchmarks. USB 3.1 Gen 1: 434 MB/s Read and 406 MB/s Write 1. Notes: Speeds will vary based on drives used, setup, and other factors. Hot-swapping.
When connected via USB, it is possible to unmount either drive from the OS without impacting the other drive, but you cannot power a bay on or off, or physically connect or disconnect one of the drives, without causing the other drive to temporarily unmount. Power. Internal UL-listed universal auto-switching.
AC input: 100 240V, 50/60Hz. DC output:, 12V 4.0A. Adapter plugs for international use sold separately Dimensions. Height: 3.3 in (8.5 cm). Width: 6.3 in (16.0 cm). Length: 5.8 in (15.0 cm) Weight.
Without Drives: 2.2 lb (0.98 kg).